Marble and granite block cutting in Kishangarh
Own a quarry, or buy blocks from one? Send your marble or granite blocks to our plant in Kishangarh. We cut them into slabs, polish them and finish every piece to size, so you get a finished product ready to sell.
Who this is for
Quarry and mine owners
Sell finished slabs and pieces, not just raw blocks. We do the cutting, polishing and finishing.
Traders and builders who buy blocks
Buy blocks straight from the mine and have them turned into slabs or finished pieces in one place.
How it works
- 01
Send us your blocks
Blocks come to our plant at Paryavaran 1st Rd, Industrial Area, Kishangarh. We can arrange transport, or you can use your own.
- 02
Cutting into slabs
We saw each block into slabs with a 1.5 mm or 2.5 mm blade. Common thicknesses are 16, 18, 20 and 30 mm, depending on the stone.
- 03
Fibre, epoxy and polish
For Carrara marble, each slab is reinforced with fibre and epoxy, then polished.
- 04
Finishing to size
Every piece is finished to the size you need. Finishing is priced by the size of the piece.
Job-work rates
| Cutting | |
|---|---|
| By weight, 1.5 mm bladeThinner cut, less marble wasted | ₹4,200–4,300 per ton |
| By weight, 2.5 mm blade | ₹4,000 per ton |
| By weight, very soft blocks | Up to ₹6,000 per ton |
| By area | ₹50 per sq ft |
| Fibre, epoxy and polish | |
| Fibre + epoxy + polish | ₹40 per sq ft |
| Finishing, by size of piece | |
| Pieces up to 3 ft | ₹20–30 per sq ft |
| Pieces from 3 to 6 ft | ₹35–40 per sq ft |
GST extra. Transport as per order: freight changes with fuel prices, so we quote it for each order. For granite, another marble or another thickness, send us the details for a quote.
Which blade?
The 1.5 mm blade costs ₹200–300 more per ton than the 2.5 mm blade. It makes a thinner cut, so less marble is wasted and more slab comes out of the same block.
By weight or by area?
Per ton is our volume rate for whole blocks, and almost all our clients choose it. Per sq ft suits small jobs. At these rates, per ton works out cheaper whenever a ton of block gives more than about 80–86 sq ft of slab (₹4,000–4,300 ÷ ₹50). Tell us about your block and we will work out which is cheaper for you.
Questions about block cutting
Do you cut blocks that I bought from a mine?
Yes, marble and granite. This service is for quarry owners and for anyone who buys blocks and wants them processed. You send the blocks to our plant in Kishangarh, and we cut, polish and finish them for you.
How much does marble block cutting cost?
For Carrara marble cut into 20 mm slabs: ₹4,200–4,300 per ton with a 1.5 mm blade, ₹4,000 per ton with a 2.5 mm blade, or ₹50 per sq ft. Very soft blocks cost up to ₹6,000 per ton. GST is extra.
Why is the per-ton rate cheaper?
Per ton is our volume rate. It applies to whole blocks, which means a lot of work, so it works out cheaper per square foot of slab. Per sq ft suits small jobs, and almost all our clients choose per ton.
What do fibre, epoxy and polishing cost?
₹40 per sq ft, GST extra.
How is finishing priced?
By the size of the piece: ₹20–30 per sq ft for pieces up to 3 ft, and ₹35–40 per sq ft for pieces from 3 to 6 ft. GST is extra.
Is transport included?
No. We can arrange transport, or you can use your own. Freight is quoted for each order, because it changes with fuel prices.
Do you cut granite, or other slab thicknesses?
Yes. We cut granite blocks too, and other thicknesses are possible depending on the stone and the block. Common thicknesses are 16, 18, 20 and 30 mm. The rates on this page are for 20 mm slabs of Carrara marble, so send us the details for a quote.
Can I see the plant before sending my blocks?
Yes. You are welcome to visit our facility in Kishangarh. Please call or WhatsApp us to fix a time.
Get a quote for your blocks
Tell us the stone, the block size or weight, the slab thickness you want and the finished sizes. Send them on WhatsApp, through our contact form, or call +91 81073 17648.
Looking for finished slabs from our own stock instead? Browse the collection or see the price list.